Why are the buttons so cheap?
There would be one button attached to the skin instead of a switch. The stink is caused by the simple and simple, the same stink is often the cause of breakdowns. Bagato this is a good hour to repair the warehouse, the equipment is being stripped, the goods are cheap, the damage is done, the damage is done. Also, the year is brought to the sign of privati corps, shukati injustice, payati, zminuvati. Why should I worry so much? The reason is in the materials, the mechanics, the contact properties, and the fact that the button looks like it's calling. I have a lot of material, but I don't want to save money on things like this.
Just to show off: a cheap button is a cheap parachute. Sometimes, you don't mess with the help.
And in critical systems, there is a short-term shift that can be costly, both financially and functionally.
The main reason for the sudden movement of the z fret
What's a cheaper button, what's a better compromise? It's been added to this list. The virobnik can be placed on the contact material, on the springs in the middle, on the body, and on the anti-corrosion coating. I'm all about the skoda resource. So the button can pratsuvati pershilka tizhniv, and then we fix the "glitch", stick it up and stop locking it up.
Open up your problem with cheap buttons:
- Oxidized abo burnout contact
- Sticking for lack of turning for pressure
- Lameness to the body is not weak.
- The destruction of the inner mechanics of pisly dekilkoh onslaught
I've got a good technical blob, and after describing it, like a button for 5 hryvnia stopped working for a few tens of dollars, I got up to possess it. https://gravatar.com/ambitious2544a2df44 .
History is not a fault, but a typical reality. The economy of a few hryvnia can turn around for a year or two, saving a few pennies for a new repair. The risik button is cheap, so you can buy it.
Having poured the material into the nadir of the bridge
The material contact is the most important factor, the most important, the most difficult button. Sometimes they can be gilded, but they can be weakened by contact, so that cheap metal is often just plain metal without any coating, which is easily oxidized. Other than plastic, the housing is made of various materials: cheap, sturdy, not too hot. You can try to tighten the screw with a soldering iron.
The third is spring mechanism. You can see it for a little "click" and turn the buttons back. Cheap models often have a weak air pressure.
Nadiiny peremikachy - tse check the balance of your work.
The leather material at the buttons is flowing into the air, making it smell good.