Conveyor rollers
Modern technology is constantly evolving, not standing still and manufacture of conveyor mechanisms. Conveyors are used in various industries and agriculture and generally in the agricultural sector. Without this equipment impossible, for example, harvesting, production of food, movement of minerals in the mines. Such conveyors are used in metallurgical industry, construction, railway, defence sectors. They are able to be transported quite large distances loads of different types: it is not only about major elements but also granular materials, which carry quite difficult. The design of this machine is equipped with a special tape mechanism, as well as religiooni. The tape itself may be made of polymers or rubber, there are also machines equipped with modular constructions.
a part of any conveyor is rollers. They organise the tension of the tape and provide its movement. These items usually have the shape of a cylinder. Manufacturer of conveyor rollers accompanied by equipping them with special bearings (such details are of open type, for example, provide operation at high loads and large enough the cleanliness of the rotation). Produce them (the rollers) of steel pipe of a certain diameter. Modern production technologies allow to make the bearing units is resistant to moisture and dust – for this they are additionally equipped with rubber cuffs. Due to the high strength of components and increases the equipment lifetime, which is very important in conditions of high dust or humidity.
According to its functional filling all the videos are divided into several types. First, smooth: these structures have found wide application in the industries which require transportation of bulk materials. Second, the deflector upper and lower rollers. First used in the grooved conveyor. They are necessary in order to prevent lateral displacement of the tape. Lower by adjusting the movement of the belt mechanism, to prevent its gathering. There are also shock absorbing casters, which reduces the load on other elements of the conveyor: rubber rings threaded on them, block the blows when running at high capacity. If you want to remove loose material remaining on the conveyor during transportation, use so-called shakes videos. They are installed on the reverse side of the tape that is on its return stroke. To move hazardous materials, use equipment fitted with plastic designs, which reduce sparks during the operation.