Screw or piston compressor

Many industrial activities require a constant source of compressed air. Depending on individual needs and other variable factors, a piston or screw compressor can be used https://promcompressor.ru>, with the corresponding receiver. Properly selected equipment minimizes electricity costs. Saves free space in rooms.

Advantages of a screw compressor

As a rule, the equipment is relatively small in size compared to alternative analogues. An additional advantage is the relatively low background noise. But, for stable operation, the equipment must be lubricated and maintained in a timely manner. Other operational features should be added:

Ensure economical use of electrical resources.

  1. High precision manufacturing of parts and operational reliability.
  2. Relatively low everyday costs during operation.
  3. The equipment is quite easy to repair in case of failure.
  4. High efficiency (air compression).

The only, conditional The disadvantage of the equipment is its significant cost. In addition, high performance is suitable for large and medium-sized enterprises with significant compressed air consumption. For small factories, the compressor will not be able to recoup its presence for a long time.

Feature of piston analogues

This design has been tested in practice for decades. It has proven its reliability in a wide variety of operating conditions. Including in unsuitable atmospheric conditions with a high dust content. In some cases, you can select spare, worn parts for the compressor yourself. The advantages of the technology are worth highlighting:

  1. extreme ease of repair and maintenance;
  2. work in conditions of high humidity is allowed;
  3. you can use a variety of filter elements;
  4. air quality depends on additional filters in the system;
  5. increased operating noise during pumping.

Piston models can produce not only the standard operating air circuit pressure for most pneumatic tools, but also extremely high pressures. The compressor is ideal for relatively small production plants, and for factories where high pressure is required in the pneumatic system.