The efficiency of metal laser cutting machines
There are many ways to process metal blanks. Modern metal laser machine has its advantages. The quality, speed and other parameters of the finished result will depend on many variables. It is for this reason that it is important to correctly select machine tools for individual needs.
What affects cutting speed
Since modern equipment uses a fairly powerful laser beam, the speed factor is dominant. Too high or too little speed will affect the quality of the edge and will need to be further processed to achieve the best result. The optimal speed is characterized by the following indicators:
- Distribution of sparks strictly from top to bottom of the workpiece.
- Slope propagation indicates high speed.
- Scattered or insufficient sparks - passage too slow.
Properly configured machine equipment, matched to the required technical and operational characteristics, gives an even and smooth cut. Laser marker gives a result of such high quality that it is not needed further process. Specialists and the company as a whole do not waste time and minimize the amount of marriage.
Influence of auxiliary gas
A different gas is used for each metal or organic substance. It not only improves the quality of work, but also speeds up the movement of the laser beam. The professional company "Multitex" sells not only modern machine tools for laser cutting, but also auxiliary equipment. And the main reasons to use auxiliary gas are worth highlighting:
- helps dissipate excess heat at the point of laser contact;
- helps to penetrate deeper into the structure of the metal;
- general increase in cutting speed without compromising the result;
- allows you to perform a complex procedure for perforating a workpiece;
- removes combustible air when cutting organics.
Laser power also plays a very important role. Do not aim at the time of purchase at the most powerful unit. A suitable laser tube must cope with a certain thickness range metal used. Too much power also affects the width of the cut, the evaporated metal. It is always worth choosing equipment for future operating parameters, without ignoring the little things.