The use, size, and variety of channels

the Channel – type metal profile with a U – shaped cross section, which is used in construction, the construction of various structures. It is produced by hot rolling at special machines or bend with pressure. Buy a channel in Voronezh a General or special purpose, manufactured in accordance with GOST, offers Metallobaza "Stalservis Plus".

using channel

the scope of the channel is quite extensive. This is due to the technical features of a product:

the
    the
  • It is resistant to vertical loads.
    • the
  • high durability.
    • the
  • light weight.
    • the
  • Replaces the massive volume of details.

the Different brand name of steel channel and view. Steel can be applied with high or low carbon.

the Channel used in engineering and car building, for stiffening steel structures, construction of private and multi-storey buildings, floors of buildings, the repairing works, to build sturdy shelves. And also for the construction of ramps, bridges, transmission towers, when carrying out communications. The channel is a durable and popular construction of industrial buildings.

Sizes

Channels triangular, have two shelves (parallel or oblique) and the base. The method of manufacture they are gracetone, bent and special.

Channels differ in height and vary from 8 to 27 cm 8 cm are used as rebar for walls and ceilings. The product height is 10 cm is used as a partition and installation of construction details. Channel 12 cm use La frames and bridge construction, and 14 cm suitable for carriage building. 16 – inch product is used to stiffen the homes and when carrying out roofing. The channel 18 is popular for industrial buildings, 20 cm is used as a reinforcing part. Of the 22 – centimeter build building with high loading, 24 cm make frames for large slabs, 27 cm popular in all types of construction with a large load.

In accordance with GOST 8240-89 channel, different varying accuracy of the rental. The product must be affixed the marking. The letter a indicates the high precision of rolling the letter B, normal precision. In this case the curvature does not exceed 0.4 %.

there is Also a marking which indicates the inclination of the faces. The class indicates the channel with sloping edges, e – the product of economy class with parallel faces, With a special products high tensile strength.

For the purchase of steel channel you need to determine the size, quantity, unit of measure (kg or pieces). From these characteristics determine the value of the product.

Полная версия