Seasonal cleaning of the heating system
During the operation of the water circuit of the heating system, organic or corrosive deposits gradually accumulate on the inner surfaces of pipes and radiators. Using professional equipment, as on the website a>, you can get rid of the accumulated garbage. Restore the technical and operational characteristics of the heating system. Much less to spend on energy during the heating season.
Causes of pollution
In the heating system, both ordinary water and a special liquid can be used. But, in any case, in the process of daily and seasonal operation, pollution will still gradually accumulate. There are several main reasons for this:
- Tap water can be high in calcium and other mineral deposits.
- Natural corrosion of steel pipes and cast iron batteries.
- Negative reaction of individual seals to a special liquid.
- Contaminants associated with heating and cooling the heating system.
- Garbage that regularly enters from the water supply.
Important: as practice shows, even if distilled water is poured into the system, pipes and radiators from the inside will still be covered with plaque. Not as fast as in the case of ordinary tap water, but still need seasonal cleaning from plaque, more details at krasnogorsk.remteploservis.ru/. Don't ignore the invisible problem. It tends to build up gradually. As a result, it leads to the complete replacement of individual heating sections.
How often is it recommended to clean the system
It all depends on many variables. As a rule, the owners of the heating system turn to specialists for help if they observe a gradual decrease in the heating of radiators, extraneous sounds during the operation of the boiler or pumping equipment. But, there are general recommendations when you should not postpone cleaning the heating system. It is urgently needed in the following cases:
- the presence of steel or cast iron in the heating system;
- how high-quality coolant the owner uses;
- average temperature during operation;
- a method of replenishing fluid in a pipe and radiator system;
- Whether repair work was carried out to replace.
Steel and cast iron pipes are best serviced twice a year. Before the start of the heating season, and immediately after its completion, in order to reduce the likelihood of corrosion processes during the downtime. PVC, aluminum and stainless steel have an advantage. In this case, it is enough to clean the heating system once a season, before starting the boiler in the autumn.