Gear pumps provide fast pumping, pumping, replacement, oil supply without leaks. They differ in a wide range of applications. They are used in agriculture and industry. The oil pump is equipped with a 12 or 24V motor. Due to its design features, the equipment has a long service life. The range of devices can be viewed at the link https://piusiua.com/g92856209-nasosy-dlya-masel by PIUSI UA.
Differences in the oil transfer pump
-
The devices have a high operating speed, which, depending on the model, ranges from 1250 to 2900 rpm.
-
The pump for transferring oil, depending on the model, has a different capacity, which varies in the range from 10 to 50 liters per minute.
-
The equipment works for 30 minutes without interruption, while it does not lose its original power with cooling after stopping work for 1 hour.
-
The devices operate with a minimum amount of noise from 65 to 75 dB.
-
Depending on the type of oil, the temperature of the working environment is -10 to +40 degrees.
-
Powered by a rechargeable battery, making the model a mobile device for use anywhere.
-
Uninterrupted operation without loss of original characteristics is carried out at viscosities from 500 to 2000 cSt.
-
Holes are provided in the design of the equipment for screwing in unions and hose fittings.
Specific features of gear pumps
The devices are made of high-quality metals, which have undergone complex processing, which ensures a long service life of the equipment with constant contact with a specific composition. This point must be remembered when choosing units for oil.
The pumping equipment can withstand a maximum pressure of 5-6 bar. For operation at oil stations, equipment with a maximum value of 25 bar is used.
Gear pumps are designed to pump oil from a depth of 3 meters, therefore they are suitable for barrels and tanks. To control the pressure when supplying the working medium, a bypass valve is provided in the design. Installation in the supply line is provided with a special BSP thread.
Convenient installation is possible due to the presence of a plate on the body. Transfer pumps do not need additional filling of the intake hose. They are of the self-priming type. The devices supply oil to a height of 6 m. Due to the structural and functional features, the models from the Italian manufacturer are an order of magnitude higher than similar units of other brands.
