The height of the stainless steel flue is correctly selected - this guarantees that during operation there is no fault in the return draft and the smoke goes out. Varto note that what we have in place is a direct threat to the life and health of people. If you still don’t know where to buy dimari made of stainless steel, take a look at the catalog of the Teplin online store: https://tepline.com.ua/ua/.
Reasons for the culprit of the rotary draft in stainless steel dimars
First of all, go to the breakdowns, let's look at the main parameters, what care needs to be taken when choosing the height of a stainless steel flue. The flow of the smoke in the pipe is created at the bottom of the lower pressure, the pipe accelerates to the flue, which reduces the role of the aerodynamic corridor. A “thrust transfer” occurs when the street wind does not blow in the air, but instead blows it into the living room. The reason for this is the design and installation of a stainless steel flue.
Design of the height of a stainless steel chimney
The height of a steel flue is determined according to the ridge of the dahu - the highest point. The dimer is located at a height of no less than 500 mm above the ridge when the pipe is extended up to 1.5 m from the highest point.
If the stainless steel dimer pipe is located at a height of 1.5-3 m, then the height is not responsible lower than the ridge of the dahu; at a height of more than 3 m - not lower than the line that goes down from the ridge under the cut 10° to the horizon. Since it is a flat pipe, the stainless steel frame must have a height of at least 1.2 m. For sufficient traction, the minimum height of the pipe from the grate to the top head is 5 m. Vishy Dimar. The recommended height is indicated by the manufacturer in the technical documentation of the scorching device.
It is better to place the dimar in the steel
The safest option is to place the dimar in the steel against the ridge of the dahu. For such an implementation, a height of 0.5 m will be sufficient. Please note that the removal of the stove may be included in the plan at the stage of designing the booth. In other cases, there is a great likelihood that you will end up with a complicated solution and choose the wrong place for the flue pipe.
The use of a smoke comb has another important advantage - the ease of organization of hydro isolation. It will be enough to put the material under the conic. You will be able to receive additional consultations regarding the selection of smoke generators and their characteristics in the future from the Tepline company.
