Dneprovskiy metallurgical plant has completed a major repair of sinter machine

the sinter plant of the PJSC "Dneprovsky" (MQM) ended a 45-day capital repair of sinter machine No. 10. Investments in capital repairs amounted to 80 million. Currently, the complex of commissioning of the installed equipment.

the Main purpose of the overhaul was the solution of environmental problems - reduction of dust emissions into the environment in the production of sinter. This was upgraded the battery of the cyclone of the machine, carrying out the flue gas cleaning from abrasive dust - the main source of harmful emissions into the atmosphere.

we have Installed new pollution control equipment and an increased number of treatment elements is mounted 540 810 so-called swirlers, where the dust under the pressure of the air is directed into the water and then in the form of a slurry waste is pumped to the storage pond.

has Undergone repair and cooling zone of the sinter machine, where there is a partial filtering of gases from dust and flow into the battery cyclone for further treatment.

Also, during the overhaul was planned to replace the shelter working side of the sintering machine, which allows you to hold the dust and transfer it into the battery cyclone, was also a package of measures to reduce pollution of the atmosphere.

revision and replacement of a number of major mechanical components of the unit, performed works on replacement of the vacuum chambers and gas, spasatelnyj trucks.

Sergey Vinnik, Deputy head of the sintering plant DMK engineering:

"a large-Scale renovation is over, while we have begun start-up activities, the results of which eliminate the revealed remarks. After the renovation, the machine will work stably, providing the company agglomerate. The number of releases to the environment will be reduced significantly, which will allow us to adhere to the environmental standards of production."