The injector is responsible for supplying fuel to the car engine. If this mechanism is clogged, the required amount of fuel will not be able to flow. Therefore, flushing the injectors is a reasonable action that should produced on an ongoing basis. Let's take a closer look at how the washing process is carried out and what is needed for this.
Features of injector flushing
If the nozzle is clean, it atomizes the fuel well, resulting in a good combustion of the fuel-air mixture. If the nozzle is clogged, spraying is poor. If you have not cleaned for a long time, the nozzle may lose its tightness. This will prevent it from closing completely. As a result, gasoline enters the cylinder incorrectly. The inappropriate consumption of gasoline begins.
When cleaning injectors, it is advisable to check the throttle valve, o-rings and other mechanisms. If malfunctions in the operation of these elements are noticed, they must be replaced or repaired.
How to detect when the nozzles need to be cleaned?
You will notice that it is time to clean the injector for a number of reasons. The engine in the car starts to start poorly, the start is delayed. Some drivers may notice this due to increased fuel consumption. Also, one of the common reasons is the unstable operation of the engine at idle.
If any of the above symptoms begin to appear in the vehicle, do not put off cleaning for a long time. This procedure requires the use of high-quality equipment. Therefore, it is advisable to carry out the procedure in specialized automotive service centers. For this, a special stand is used, through which a washing solution is supplied. You can carry out cleaning without removing the injectors from the vehicle. However, this approach can have negative consequences. Contact with cleaning solution on candles can cause them to fail. Engine oil can also go bad.
There are several programs for cleaning nozzles, which differ from each other in the intensity of flushing. At the stand, you can check the performance of the injectors, test for tightness.
In situations where it is not possible to remove deposits using a stand, ultrasonic cleaning can be used.
If you need to clean the injectors, you can contact Arven Auto specialists. They perform all the work efficiently and on time.
