Home / Publications / Digest / Авто/Мото / Hydraulic filters - purpose and benefits

Hydraulic filters - purpose and benefits

Авто/Мото

Such filters are designed to protect hydraulic systems, as well as to prevent all its elements from premature wear. Such systems can be applied in various directions.

Hydraulic filters - purpose and benefits

Such filters are designed to protect hydraulic systems, as well as to prevent all its elements from premature wear. Such systems can be used in various directions, it is worth highlighting the key ones:

• equipment for agriculture - for example hydraulic filter Р179343 ;

• loading units;

• construction and road equipment;

• chemical, concrete and asphalt enterprises;

• earthmoving transmissions;

• drilling units.

Given the high cost of most of the above units, we can objectively say that a high-quality filter is extremely important to ensure the performance of devices under high loads.

Poor filtration in hydraulic systems is the cause of most breakdowns (more than 80 percent), respectively, the quality of the filter allows you to avoid financial losses for expensive repairs.

Types of filters

Complex systems, as a rule, require several filters at once, each of which has its own characteristics.

• In the tank. Deep cleaning device.

• Pressure. They are located between the element to be protected and the pump of the system.

• Suction. Mounted on the hydraulic tank or in it.

• Drain. They are located in the drain system.

• Additional cleaning. To work with complex systems or variants that contain a large amount of oil.

• Breather filter. They are located in the tank.

The systems may also include other means of cleaning, for example, a mobile system, which is aimed at cleaning the working fluid of the system.

Benefits

Such filter devices boast a large number of advantages over their oil or fuel type counterparts. Below are the most significant of them:

• high operating pressure;

• cope with large flows of passing liquid;

• large pressure drops.

Service Features

According to the experience of using hydraulic systems, most breakdowns are associated with untimely oil changes or poor cleaning. Very often used oil is not suitable for the type, or does not correspond to the season. It is important to monitor temperature and pressure readings as they directly affect viscosity. For example, in winter, the viscosity increases, which can damage the filter.

Order filters on the website https://avtodiller.by/

Сomments
Add a comment
Сomments (0)
To comment
Войти с ВК Войти с ФБ Войти с Яндекс
Sign in with:
Войти с ВК Войти с ФБ Войти с Яндекс