Kleovi sumishi: you see, you belong to that vibir brand

You can play an important role in any repair. The stink of vikoristov is used for fixing rare materials — from ceramic tiles to thermal insulation blocks. Be it easy for the installation to be a significant part of the world to lay down properly with the selected glue, which gives the appearance of its own specialness, which is associated with the mind and exploitation.

The main types of these sums are such that

Tile adhesive is a universal adhesive used for laying ceramic tiles on horizontal and vertical surfaces. For example, Ceresit CM 11 is good for robit in dry and saline soils, while Polimin P-11 is a very economical solution for butyric soils. ANSERGLOB BCX 30 i Baumit Basic will provide excellent adhesion to cement-based concrete foundations.

Elastic glue can form in the minds of deformations — during installation on "warm logs", balconies, terraces and facades. Yogo perevaga — zdatnist vitrimuvati rozshirennya ta zasnennya osnovy. Knauf Flex ta ANSERGLOB BCX 39 may be more flexible and suitable for laying tiles in a large format. Ceresit CM 16 can also be installed on folding surfaces, including old tiles.

The glue is heat resistant. To install the cladding in rooms with high temperatures, a thermal adhesive is applied. Tse kamini, pechi, dimokhodi, pliti. The moment TermoFix ta Artisan T-80 is specially designed for such minds. The stink of the window is heated to +1000°C, without breaking the adhesion of the authorities and the security.

Glue for porcelain stoneware. Porcelain stoneware is an important thin material, which requires a particularly fine glue for a clean building. Sumishi Ceresit CM 17, Baumit FlexTop, Polimin P-22 will bake over and glue together the great slabs. The stink is for the interior and the interior of the building, the cream is for the facade and the basement.

Glue for gypsum board. The installation of gypsum board without a building frame requires additional special glue. For example, Knauf Perlfix is a dry bag for direct cutting of gypsum cardboard sheets to concrete and steel surfaces. An alternative to the Polimin GC-5 abo ANSERGLOB GK, I may trivialize the critical hour and the good quality of the sheet during the installation.

Glue for mosaics, marmara, natural stone. I'll use special adhesives to cover the interior of the material, but I won't touch the rings. Ceresit CM 115, ANSERGLOB BCX 47, and Baumit Mosaik are designed for robots with marmor, glass mosaic, and decorative stones. The smell of volodya is high-pitched, elastic, and watery.

Glue for pinoplast, polystyrene. The insulation of the insulation (pinoplast abo pinopolistrol plates) to the facade must be removed for additional light and plastic bags. The middle of the most popular — Baumit Proctact,