Metal, one of the most versatile materials in construction, installation and repair work. metal structure factory to ensure that the structure has a minimum weight, but at the same time retains sufficient strength, special profiles are used. The material better distributes the load throughout the building, preventing the concentration of stress at individual points.
Most popular profile types
At the moment, manufacturers of steel profile materials can offer a particularly large range of raw materials for future metal structures. Shaped products can be used as a finished product, bent, welded and connected to individual sections using hardware. The most popular and in demand in industry and in the domestic sphere can be identified:
- A corner with shelves of the same and different lengths.
- I-beam, withstands the largest vertical and horizontal loads.
- Channel, one of the universal profiles for floor mounting.
- Round and square pipe, has multiple uses.
- Other types of consumables used in metal structures.
Important: in order for the structure to resist all the negative factors during everyday operation, a competent engineering calculation is required. The profile itself will not cope with the loads if it is incorrectly fixed, has excessive or insufficient wall thickness. In addition, the finished structure needs additional protection against corrosion.
The main advantages of a metal structure
Regardless of the physical dimensions and intended use, the finished product will have a number of general advantages. The most important factors that are valued by consumers are the following factors:
- wide operating temperature range, from -70 to +450 degrees;
- high static and dynamic building strength;
- the possibility of mounting from separate parts or blocks;
- metal is reusable and recyclable; The
- construct can be used for other than its intended purpose.
The shaped steel from which the metal structure is made, in case of damage, can be easily replaced with a similar one. Thus, completely restoring the original technical characteristics of the metal structure.
