In addition to emergency pumping stations, equipment that comes into contact with potentially unsafe regions is due to the mother of good power. Adblue pumps are available in a wide range. Designed specifically for pumping gasoline, diesel fuel or extinguishing, it is safe to operate at gas stations. The structure is not insured and operates under emergency conditions with a voltage of 220 volts.
The secret of the popularity of the brand
Regardless of the technical characteristics, the pump is as easy to use as possible. It is necessary to seal the heating mains sufficiently and ensure a safe connection to the electrical grid, so that the equipment can be repaired remotely. The pump has a great reserve of power and may not require regular maintenance. Other, no less important operational factors are included:
- Construction in a single unit minimizes the need for space for pump operation.
- Disassembled design for replacing worn parts, gaskets .
- Clear air cooling is independent from time to time.
- The electric motor is vibration-protected.
- The pump can operate with a wide range of viscosity.
Important: despite its versatility, the device is not intended for pumping thick mineral or synthetic motor oils. This includes supplying fuel oil to combustion systems or pumping it from one tank to another. Colored metals in the pump design completely prevent sparks from appearing.
Peculiarities of pump operation
The pump is primarily used for gas stations, as installation, as it moves a large amount of water from the storage capacity until the end. This could be a gasoline tank, a barrel for storing fuel, or other containers that contain potentially dangerous rare materials. Almost all pumps equipped with the AdBlue trademark have the following technical capabilities:
- dry water depth of at least 1 meter;
- to achieve a productive working wheel for 5 shovels;
- nominal shaft speed 2800 rpm;
- standard 1 inch expansion;
- stainless steel pump housing.
The remaining factor is especially important for routine operation. The pump itself does not react with the medium it is pumping and does not enter into a chemical reaction with it. On the other hand, the increased moisture in the middle of the robot will not cause the electrical control to go out of order.
