Electric heating elements in modern saunas and baths are replacing the tradition of open fire. There is only one reason, buy heating elements for a sauna and it is much easier to install it in the heater from both the economic and the practical point of view. But, improper operation can lead to burnout of an important heating element. And in the most unpleasant cases, and to shock people.
Factors of competent exploitation
Even at the design and installation stage of an electric sauna stove, it is necessary to take into account some of the features of connecting electrical equipment. Their presence will greatly affect normal operation and the absence of the most common breakdowns. The presence of the following devices is recommended by experts:
- Connect the heating unit to a dedicated timer.
- The thermostat will make the oven work almost automatically, maintaining the optimal temperature will not depend on external factors.
- The presence of a remote control will make the control process not only convenient, but also safe for people.
TEN made of stainless steel has an advantage over the tape counterpart. It can withstand significant temperature changes better. However, this does not mean that you can neglect the use of the above controls for heating devices.
Major breakdown factors
Most often, the electric heating element fails due to significant overheating, or sudden cooling. In the first case, the installation of a thermostat helps, in the second, melting the laying of stones. But, these are not the only reasons why the heating element may need to be replaced:
- break in the lead wire;
- short circuit due to high humidity;
- limescale on the outer shell of the element;
- normal wear and tear of the electric heater;
- power supply voltage is not suitable.
Unfortunately, almost any failure associated with a heating element leads to its replacement. It cannot be repaired. It is enough to go to Ten-Market website to find the optimal one in terms of physical and operational indicators suitable heating element. The presence of a voltage stabilizer is another effective way to protect against significant voltage surges in the network. Experts do not recommend turning on the sauna for maximum heating. Moderate operation of the heater will allow it to function much longer under normal operating conditions.