Home / Publications / Digest / Equipment / Plate parts of the heat exchanger: how much can you spare for scorching?
Home / Publications / Digest / Equipment / Plate parts of the heat exchanger: how much can you spare for scorching?

Plate parts of the heat exchanger: how much can you spare for scorching?

Equipment

Plate parts of the heat exchanger — yak energozberigayuchi vikna: a few deposits, a few ten-litre economies

Plate parts of the heat exchanger: how much can you spare for scorching?

Uyavit: you pay for the scorching, ale 20% of the heat is literally "plugged into the pipe." This is how we use our old systems. The plate parts of the heat exchangers are made by the rules of the gris. The axis should be pumped in practice:

Scorching is cheaper by 15-25%

The high KCD of the plates is up to 85% versus 50-60% for shell—and-tube models. The main thing is to replace the old teapot with a thermopot: it's better, and the energy is better. For example, the great residential complex in Europe fell by 22% in the past season due to modernity. The secret is that the plates prevent intense heat from entering the great contact area due to the turbulence of the flow. The pumps of the mensche are switched on, that electrical energy is turned on by the third mensche.

Electric power for pumpiv — minus 20%

The plates of the construction part are lower than the opir flow. Don't pump between the walls, just put the water through the high tubes. In the promiscuous region in Central Europe, the government allowed 10,000 euros to be spared on the electricity market. In addition, we need to provide a safe service for the service of the owner — the pumps and valves are needed more often.

Repairs without surprises: economy up to 40%

Did the tube burst at the casing? Get to the bottom of the whole block. The plates often have a heat sink, but they can also be fitted with a plate instead of a gasket. On a grub combine in Ukraine, such repairs cost 500 euros and 3000 euros — the difference is obvious. The design allows you to localize the problem without fixing the entire system. This is critical for the Chinese, the Chinese universities, and the data centers, so that the year can be reduced to a significant amount.

It will pay off in 2-3 winters

The average payback period of the investment is 2 autumn seasons. However, on the edges of these high mountains (for example, those of the metallurgical backwaters), the economy is "vibrant" and can be owned for 1.5 years. It is important that we try to save time: we spend time on energy, we spend a lot of great repairs, we spend a lot of time on plates, we spend a lot of time on ten minutes.

Clean — does not mean clean

Is there a scum hole? The plates are fixed without dismantling the entire system. The European communal company has an hour of service that has been reduced from 3 days to 8 years — the boiler house is practically without downtime. For the whole victorious special miyuchi rozchini abo mechanical methods. Due to the lack of design, it is possible to install a special configuration of plates for robots with different types of heat carriers, for example, to switch to antifreeze without jamming.

Universality: one system for multiple tasks

The plate parts of the heat exchangers are not suitable for scorching. The stink is effective:

  • Ventilation: heat recovery inside
Сomments
Add a comment
Сomments (0)
To comment
Войти с ВК Войти с ФБ Войти с Яндекс