pellet mill is a critical equipment in any livestock enterprise or in the workshop for the production of food to farms. This device worked for a long time and continuously, must buy spare parts for it. In the event of a breakdown, when equipment breaks down, production stops. To prevent breakage, impossible, so employees only have to learn quickly to eliminate them.
to find out what you need buy spare parts for pellet mill, you should understand the principle of operation and device to this equipment. The pelletizing process takes place according to the following algorithm:
- First, the raw material is loaded into acceptance bunker.
- Of it arrives in the working chamber of the device, there are rollers. Raw takes all the available space between them.
- Videos — this is one of the most important parts of the granulator. They push raw materials to the matrix.
- When the material passes through the holes in the matrix of granules formed it.
- At the exit of the apparatus the pellets are cut with a sharp knife.
- round plate;
- metal ring.
depending on the species of animal for which the food is intended, it is necessary to adjust the parameters of the granules. The classic size of each item varies from 4.7 to 12.7 mm. the smallest elements are designed for birds and fish, and large — for horses and cattle.
useless is likely the most frequently used parts of the granulator. It dies and rollers. They can break due to wear and tear, internal stress of the metal, or too hard material. To perform the replacement of the element is very simple. It does not have to possess special skills and have special tools. The granulator will be able to repair even one person. With the availability of spare parts recovery in the production line will not take much time.
There are 2 types of matrices:
the First type is designed for smaller devices and one for industrial equipment. Any matrix has a plurality of holes that form the pellets when they pass through the raw material. The size of the holes depends on the size of the finished items. In any industry there should be several such parts of the granulator. To quickly adjust the feed settings, you simply need to replace one matrix by another.
the Use of elements with different hole sizes allows to expand the range of products and produce material for feeding any animal. A wide range of products is an important criterion for the success of any enterprise. Learn all about the acquisition of spare parts for the granulator, the differences, and the selection criteria on the site https://kazan.nmkagro.ru/