Laying ceramic tiles on the floor is not only a process of interior decoration, but also the creation of a strong, durable coating. This process requires care, precision and a special approach to each stage of work.
Surface preparation
Before installation, it is necessary to carefully prepare the surface. Clean the floor from dust, dirt and old coating. Level the base, eliminate uneven areas, fill cracks and potholes. This will allow you to get an even base for laying.
Calculation and marking
Before starting laying, it is necessary to carry out careful marking. This will help determine the exact center of the room and create a guide for laying the tiles. It is recommended to use special tools to draw straight lines and determine attachment points.
Glue Preparation and Tool Selection
Choosing the right adhesive is important. When laying ceramic tiles on the floor, it is recommended to use an adhesive specifically designed for this purpose. In addition to the adhesive, you will need a notched trowel to apply the adhesive evenly.
Laying tiles
Applying the adhesive: Apply the adhesive evenly to the prepared surface using a notched trowel. It is usually recommended to apply the adhesive to a small area so that it does not have time to dry.
Laying tiles: Start laying from the center point of the room, following the markings. Press down on the tile until the adhesive adheres well. Use cross wedges to maintain equal spacing between tiles.
Cutting tiles: If necessary, adjust the size of the tiles using a special tile cutting tool or tile cutter.
Grouting the joints
After the glue has dried, start grouting the joints. Use a special grout, applying it evenly to the seams between the tiles. Using a rubber or plastic spatula, grout the seams, removing excess compound.
Completion of work
After the grout has completely dried, remove any residue from the surface of the tile using a damp sponge or rag. Clean the surface from possible traces of grout.
Useful tips:
- Prepare all materials and tools in advance: This will help avoid unnecessary interruptions during the installation process.
- Contact the professionals: If you are not confident in your skills or plan to carry out the work in difficult conditions, it is better to contact experienced specialists.
Laying ceramic tiles on the floor is a technically complex process that requires careful preparation, precision and care. By following the steps and following the recommendations, you can achieve excellent results and create a durable and beautiful coating for your room.
The informational article was prepared with the participation of MirPlitki employees. You can view their range at floor tiles here.
