During the operation of a chainsaw or an electric analogue, the chain with the plates cutting wood suffers the most from premature wear. If you initially choose wisely and buy chain oil in Yekaterinburg, use it for its intended purpose, you can significantly extend the service life of the consumable material. A timely lubricated chain will never break while using the saw at any time of the year.
How often should a chain be lubricated
It is difficult to give a definite answer to this question. This depends on the intensity of use of the chain saw and the individual recommendations of the equipment manufacturer. But under no circumstances should you completely abandon lubrication. The glide guaranteed by the lubricant reduces the load on the saw's gasoline or electric motor. There are general lubrication recommendations that you can follow:
- After long-term storage of more than one month.
- Immediately after intensive use with overheating of the saw.
- Lubrication at the end of mechanism maintenance.
- As a final process after washing the chain from contamination products.
- If the chain has been exposed to rain, snow or has been in a humid environment.
Experienced chain chain owners saws can tell when the lubricant is completely used up by the sound of the mechanism. The chain, when idling or under load, will make a specific sound of dry metal friction. It is necessary to stop work immediately and resume it only after lubricating the chain.
Features of high-quality oil
Not every machine oil is suitable for lubricating a chain saw. You shouldn't even try to use grease for this purpose. Only special compositions that have certain physical and operational properties:
- lubricant adheres well to metal surfaces;
- does not tend to be quickly removed from the metal under the influence of friction;
- reduces the wear rate of metal plates;
- protects the steel surface from corrosion processes;
- does not contaminate the working surfaces of the chain saw.
Even relatively small the amount of lubricant can ensure the operation of the chainsaw for a sufficiently long period. Minimizes the risk of chain breakage directly during operation of the mechanism. Reduces the cost of replacing a prematurely worn chain with cutting elements.
