Home / Publications / Digest / Equipment / Anemometers from EPMGGO

Anemometers from EPMGGO

Equipment

the Company manufactures IMGGO Cup and vane anemometers on their or your projects. Repair and calibration of instruments. Fast delivery in Russia

Anemometers from EPMGGO

the Rapid technological development in the world, is in an improvement of the means of control of man-made and natural processes. Anemometers — devices for determining the rate and direction of movement of the gaseous media. Applications: meteorology, construction, ventilation systems industry.

Company of epmggo, was transformed into a separate independent company in 2001. Our experts have compiled nearly a century of experience observing and studying metaoffline with the accumulated knowledge. Technical solutions used in the company-developed devices that combine traditional and modern technologies.

Vane anemometers

we Offer vane vetromer of the following types:

АП1М-1

trim tool: the impeller or transducer; digital measuring Board; a handle for holding the impeller. The principle of operation. The vetropriemnika rotates under the action of the air flow direction. The electronic Converter circuit measures the wind speed, proportional to the frequency of rotation of the impeller.

ASO 3

Anemometer is used in industry and the national economy for the registration of the wind. The sensor is permanently installed on the towers or construction cranes. Control unit placed in the cab of a crane, for oil rigs or broadcast in another similar room.

Cup anemometer

Make the Cup vetromer of the following types:

АП1М-2

Differs from the anemometer АП1М-1 sensor design. Instead of a vane of the impeller vane is used with 4 hemispheres — cups. Used in meteorology, industrial ventilation systems and air conditioning systems in industrial sanitation.

MS-13

Anemometer consists of a primary sensor, in the form of a chopper with 4 bowls and dial with 3 scales into units of hundreds and thousands of the measured parameter. The anemometer is mounted with screws on the exposed surface to measure the speed and direction of the wind.

turn on the device via the detent associated worm gear with reducer. Vetromarim MS-13, is located at an altitude control by means of a cord podernuovo the lugs near the detent. The instrument calibration is done once a year.

Range of ready devices

АП1М

Anemometer with two sensors: vane АП1М-1 Cup АП1М-2. Measuring sensors of different design improve the accuracy of the research.

M-95-TSM

the Device is designed for installation on tall structures, like masts and towers equipped with emergency devices. The main objective of the anemometer, to send a pulse to the enable protection when winds are in excess of the estimated parameters. Comes with heated sensor.

Anemorumbometer Anemometer 1

Device registers the direction of air movement in a circular range. In addition to the standard measurements, anemorumbometer processes, displays and transmits data to computer device. Optional current loop and the modem. Such instruments equip: meteorological station, research enterprises, drilling platforms.

At the request of the customer to develop and produce the body of the instrument, perform the programming boards. Take the service purchased from the company, device repair, calibration services.

Full catalog of anemometers: https://epmggo.com/anemometri/

Сomments
Add a comment
Сomments (0)
To comment
Войти с ВК Войти с ФБ Войти с Яндекс
Sign in with:
Войти с ВК Войти с ФБ Войти с Яндекс