Tile is an ideal covering for underfloor heating systems due to its high thermal conductivity. However, it is important to choose the right type of underfloor heating to ensure comfortable heating. It is also important to choose the right place to buy. On the website https://leto.net.ua/teplye-poly/teplij-pol-pod-plitku find optimal conditions for it really simple.
Types of underfloor heating for tiles
Cable type underfloor heating is ideal for tiles. The heating cable is laid in a snake or other way under the cement screed, which serves as the base for the tiles. Such systems provide uniform heating and long service life.
The mats are a cable fixed to a mesh, which simplifies installation. They can be laid directly under the tiles using an adhesive layer. This is an ideal option for rooms with low ceilings, since mats practically do not increase the height of the floor.
Film systems are used less frequently, as they are more suitable for coatings that do not require glue (laminate or linoleum). But some models of infrared floors can be laid under the tiles if a thin layer of protective screed is used.
Can tiles be laid directly on a heated floor?
Laying tiles directly on a heated floor is possible, but only in case of using heating mats or infrared film. In this case, it is important to observe several conditions:
- The quality of the foundation. The base must be smooth, clean and strong. Unevenness can lead to cracks in the tile or adhesive layer.
- Special tile adhesive. Use glue designed for use with heated floors. It is resistant to heat and does not lose its properties due to temperature changes.
- Care when laying. Make sure that the heating elements are not damaged during operation.
If a cable or water system is used, a tie will be required to distribute the heat evenly and protect the heating elements.
How to avoid mistakes when laying heated floors under tiles?
Before starting work, draw up a laying diagram. Avoid placing heating elements under furniture or appliances without legs to prevent overheating. Use only certified heating elements and materials recommended by the manufacturer. Pay special attention to choosing tile adhesive and grout that can withstand heat. To minimize heat loss, install thermal insulation before installing a heated floor system. This is especially important for rooms on the first floors or above cold basements.
