Thermobar is an indispensable tool in grain storage

Temperature control of grain material stored in a warehouse or in special containers is necessary in order to prevent its germination. This cannot be done with a conventional thermometer. Availability of modern thermal bars for grain will provide control of grain material with maximum accuracy. Temperature measurements inside the tank to a depth of 3.5 meters.

The principle of operation of the probe

In everyday or occasional use, the device is as easy to use as possible. To use it, there is no need to go through lengthy staff training courses. It is enough to familiarize yourself with the general rules and standard operating instructions. The operation algorithm will look like this:

• Make sure that the thermal bar is working.
• Immerse the probe to the required depth.
• Wait for 5 minutes until it levels out temperature.
• Take readings from the device.
• If necessary, repeat the procedure with other containers.

Thanks to the most accurate readings, grain stockholders can lower the temperature in the warehouse or tank in time to avoid natural germination of grain. The probe shows an accuracy of readings from 1 tenth of a degree. This is quite enough for warehouses and industrial granaries.

Main field of application

Regardless of the tool version and the length and diameter of the rod, the device uses one type of sensor that records the current temperature inside the grain mass. Many enterprises that use grain as a raw material make significant stocks. If the raw material begins to germinate, it is considered spoiled and cannot be used for its intended purpose. The tool is especially relevant for the following areas:

1. when storing grain in bulk in a warehouse;
2. inside a railway car;
3. in professional granaries;
4. plant for the production and packaging of animal feed;
5. other agricultural enterprises.

Thermal bar offered by TEMIX, maximum a useful tool for poultry farms that make their own stocks of grain or corn, in order to later use the raw material as feed. The tool is made in a protected version. Absolutely not afraid of high humidity, a lot of dust. Can be stored under normal storage conditions.