This type of irrigation primarily saves water resources. Drip irrigation is practiced not only in the garden plot and small gardens, but also in large fields. Without a well-planned arrangement of many elements and the use of accessories https://avtopoliv.com. ua/ru/kapelnyy-poliv/ it is almost impossible to organize economical watering.
A tube as the basis of drip irrigation
If there is a source of water on the site, it is better to prepare it in a barrel on a small hill, it can be safely used for drip irrigation. Heated water will not harm the root system of plants. On the contrary, it will stimulate their growth, significantly increase the yield of crops dependent on regular watering. There are several options for choosing tubes:
- Special plastic tubes with built-in water dispensers.
- Ordinary polymer, soft tube with holes made by an awl.
- Rigid pipes with well-placed capillary dispensers.
The first two options are quite budgetary, and require maximum horizontality from the site. The height difference should not exceed 2%, otherwise, watering will not work normally. The flow rate of water in each capillary depends on the pressure inside the tube. The last analogue is professional. Serves for many years and allows you to fine-tune the supply of liquid to plants.
What other irrigation accessories will be needed
Main pipes should be added to the basic fixtures. They are necessary for a uniform supply of water to each of the capillary irrigation lines. Polymer tubes will last much longer, are affordable and much easier to seal. In addition, the following components are used for irrigation:
- small stopcocks for shutting off individual circuits;
- connecting fittings for expanding and laying additional lines;
- simple filtering equipment to prevent contamination of dispensers;
- replacement injectors that spray water in strictly defined proportions.
Professional accessories will allow you to quickly and effortlessly mount a drip irrigation system, even on a relatively large area. In addition, the first time it is possible to achieve the necessary tightness. Adjust the fluid supply for each circuit. Water is supplied directly to the root system of each of the plants, preventing the development of a large number of weeds. It is quite easy to replace individual elements of the system if they are damaged during seasonal operation.
