Installation of truck scales is a responsible and complex process that requires a serious approach and relevant knowledge. Failure to comply with the rules and regulations may result in improper operation of the balance, as well as possible accidents and injuries. In this article we will talk about how to properly install truck scales and what requirements must be observed.
Ways to install truck scales
Before you start installing truck scales, you need to choose a place to install them. It should be a level and firm place that is not subject to vibrations and that bears sufficient load. It is also necessary to take into account the accessibility to the installation site for vehicles, as well as the availability of power supply and communication for data transmission.
There are two main ways to install truck scales - ground installation and installation in a pit. Ground installation involves the installation of scales on a special platform, which is located at ground level. This installation does not require large earthworks and provides convenient access to the scales. However, its disadvantage is that the overall design of the equipment occupies a large usable area on the territory of the enterprise and requires proper organization of logistics.
Installation in a pit involves the installation of scales on a specially prepared deep foundation, which allows you to weigh any cars and machines. However, pit installation requires excavation and more complex installation.
Requirements for the installation of truck scales
When installing truck scales, a number of requirements must be observed to ensure their correct operation and safety.
1. Installation must be carried out on a level and solid surface that is not subject to vibration.
2. The balance must be installed on a solid and solid base that can withstand the load.
3. Installation must be carried out taking into account the need to provide access to the balance for maintenance and repair.
4. When installing, it is necessary to take into account climatic conditions and the possibility of protecting the balance from the effects of precipitation and other adverse factors.
5. The balance must be installed in accordance with the requirements of the legislation in the field of technical operation and safety.
6. When installing, it is necessary to take into account the requirements for measurement accuracy, which are determined by the type of scales and their purpose.
7. Installation must be accompanied by testing and calibration of the balance to ensure its accuracy and compliance with standards.
8. Під час встановлення необхідно передбачити систему контролю та управління вагами, яка забезпечує їх надійну та безпечну роботу.
9. Важливо враховувати вимоги до електроживлення та електромагнітної сумісності ваг, щоб унеможливити перешкоди та несправності.
10. При встановленні необхідно враховувати вимоги до безпеки та охорони праці, особливо під час проведення земляних робіт та монтажних робіт на висоті.
In general, the installation of truck scales requires skills and experience in the field of construction, electrical engineering and automation, as well as compliance with all necessary requirements and regulations. Therefore, in order to ensure a quality installation and reliable operation, it is best to contact the official weighing organizations directly.
Information source https://асп.рф/info/scale/informaciya-ob-avtomobilnyh-vesah/ustanovka-avtomobilnyx-vesov-pravila-i-sovety/155
