Home / Publications / Digest / Equipment / Steel tubular support

Steel tubular support

Equipment

Power tubular supports is a stepped structure consisting of two pipes of different diameters.

Steel tubular support

Modern highways, urban streets, squares, entertainment and sporting facilities, car parks, the shopping centers are created on the basis of improved lighting. However, it requires equipment that you can install lighting. It is best for this purpose is the support of OSF because it has a high level of bearing capacity. It is possible to mount brackets to install the required number of luminaires, suspension and SIP a variety of large-scale structures for advertising.

What is the connection on the base of the flange?

Increases the reliability, since power flange tubular structure acquires high resistance. However, its installation is carried out preparatory work:

  • Escapes the pit depth of about 2.5 meters;
    • Fit the base unit. For a set prop. They are attached to the flanges with studs and bolts.
      • After installation you can make the necessary vertical adjustment of the structure.

      In, what is special about this design?

      is Generated by the metal rolled in tubular type with high quality. The barrel support is formed on the basis of the design of stepped form, made of pipes with different diameter. The wire to power the lighting devices is supplied through the air or underground method. For the first case is used a special hole with a diameter of 30 mm. It is created on top of the support area. In the second case, the audit operated window located at the bottom of the support.

      Features

      This equipment has impressive capabilities. However, we consider them in detail:

      • Apply a protective layer against corrosion and aggressive environmental influences. Created with hot-dip galvanized with a thickness of 70-120 microns;
        • operation for more than 30 years;
          • Used steel has a thickness of 7-10 mm;
            • allowed to load in the region of 300 - 1 500 kg;
              • maintenance is carried out through a special hatch;
                • Height, maybe up to 9 m;
                  • you Can use up to four cones to holder;
                    • Ground is created via a hole cut for the application M10.

                    To protect from moisture all used the same zinc-coating surface. To increase aesthetic perception allowed the paintwork.

Сomments
Add a comment
Сomments (0)
To comment
Войти с ВК Войти с ФБ Войти с Яндекс
Sign in with:
Войти с ВК Войти с ФБ Войти с Яндекс