When drilling metal, the operating temperature of the cutting tool must be at the maximum permissible level. To maintain it in normal condition, it is advisable to use special fluids used to lubricate the tool. If you need lubricant-coolant company " ", engaged in the supply of industrial equipment for metalworking and drilling. On the official website https://kerner.ru you can see the product catalog.
Features of the operation of cutting fluids
The issue of using coolant for machine tools remains relevant at all industrial enterprises. Among the main properties of their application, one can single out the provision of heating the drill to the optimum operating temperature. This is achieved by reducing the friction between the workpiece and the working tool. These features have a positive effect on tool life, cutting edges and inserts. This increases the drilling speed, improves the quality of the parts obtained as a result of processing.
The liquid contains mineral and vegetable oils, additives, emulsifiers and other substances that provide high performance.
How to order coolant?
The selection of lubricants is presented on the page of the virtual catalog. The most popular product is the coolant concentrate, which is diluted in a percentage ratio of 1 to 10. Here are the products of the manufacturer "Borhe " in canisters with a capacity of 1, 5, 10 or 30 liters. Since this liquid is concentrated, its acquisition is beneficial. For example, the price for 1 liter of concentrate is 300 rubles. It is easy to calculate that after dilution with water, 1 liter of ready-made cutting fluid will cost 30 rubles.
To order a canister with the required volume of coolant, just go to the company's website or write to the company's manager in the chat. It is possible to arrange delivery to any Russian region. For detailed information and advice on purchasing, please visit the site.