The main drawback of the mechanical method of processing metals is the potential risk of damaging the raw material. Laser cutting of sheet metal has its advantages . When cutting metal, there is a thin layer of energy that cannot deform the sheet. However, after cutting off the finished result, the finisher will not need to further revise the edge or paint the edge. The part can be immediately frozen in the manufacturing process.
The speed of the laser robot
The various methods of processing sheet metal produce their own nominal speed of the finished result. Call, the deputy will be able to remove the details of the yakomog quickly, without any hassle. This product can be satisfied with the current state of affairs, which is supported by a special program, which does not allow for constant compensation during the course of the laser exchange. Liquidity to be deposited in the presence of current officials:
- The number of openings and the geometrical geometry of the metal part.
- The thickness of the steel billet for which it will be processed laser.
- The number of parts in the batch and the size of the sheet metal.
- The accuracy does not negatively affect the quality.
- The presence of damage to the appearance of the sheet metal.
- li>
Important: come out Other methods of processing rolled metal. So, in some cases, it is necessary to use other technologies that can give no less clear results for less work. Hydraulic presses miraculously create folding molds with bent parts. The leather part has identical technical characteristics as the front one.
Basic advantages of a laser
Currently possessed, it practically does not require the transfer of labor to personnel during the preparation of parts. In fact, after programming and installing the workpiece on the work table, the laser machine continues its work until the program ends. The main advantages of the current cutting method include the following technical characteristics:
- no scale at the edges of the workpiece cut;
- unmatched accuracy of laser positioning exchange;
- the amount of electrical energy is obviously small;
- the clarity of the application for the money manager;
- the program can be used to save a different term.
If you repeat the request, you won’t have to write the program all over again. It is important to briefly shorten the term that is required for the operation of a laser machine. Hydraulic presnozhyci made shvidko can cut steel reinforcement without defects, How to get stuck when prepared green concrete virobes. Sheet metal requires more modern technologies, such as laser cutting.
